Juice-y Couture Handbag

With all this over-rated hype over fancy schmancy over-pricey Juicy Couture accessories, I'll show you my very own ... JUICE-Y Couture Handbag Spring/Summer 2008!This is a crafting project I did back in March 2008. And since then there were requests for tutorials but I have not gotten around making another one, so I am going to illustrate and explain.

In my case, I used 4 identically sized carton boxes. For a wider bag, you can opt for 5 or more, and for a narrower bag, you can use 3 or even 2 cartons. Open up the seal at the top carefully by hand and remove the plastic cap (if any).Prepare 3 Types, as illustrated:
Type 1 : End - 3 sided with 1" flap and punched holes along one side;
Type 2 : Intermediate - 2 sided with 1" flap and punched holes along both; and
Type 3 : End - 3 sided, no extra flaps and only punched holes along one side.

Cut of the the top part, leaving about 1" from the crease line. At the side flaps, measure and mark a stretch of approximately 20mm spaced points. At the marked points, use the hole puncher and make a hole.(Tips: For evenly spaced openings and uniformity, use a separate cardboard strip and punch the holes evenly along it. Then overlay the strip on all the flaps and traced the holes onto it with marker.)

Fold the top flaps inwards.Here, we'll 'stitch' it all together. Using backstitch, I stringed up the carton boxes with 1 pair of orange and 1 pair of yellow shoelaces to string. You can choose your own color to match the graphics on the carton boxes. Start from the 2nd hole from the top.

1 ...2 ...3 ...As for the rings for the strap, they were a total of 4 aluminum can tabs. Close-up like so ...Here's another look!

Mysterious

Borneo Boy asked me to make him a mask for our PAMSC BTS Gala Dinner.

What are the chances one would get to pressed aluminum foil up on the face of the president of an architect's association at a charity auction dinner with lots of who's-who?

Sure! Why not ...

At the Habitat for Humanity charity dinner, I traced and contoured the profile of CW's face with an aluminum foil & marker pen that I brought from home. Forgot to get someone to take a photo of me doing it in the middle of the dinner. But this is the photo of the aluminum foil (after) on the the dining table; and after I applied on the strips of masking tape.To hold CW's mask in place, I tied in the transparent rubber band I used for beading, on both sides of the mask. And here's the both of us. CW sprayed finished the mask with white and added the tear himself after I handed him the mask. That's some DIY effort there!Now, either my nose is not in the middle of my face, or the mask is not centered.